中文 | English

Shenyang FuShiDe Technology Co.,Ltd.


Focus on CAN Bus for 10 years,CAN bus industry leading unit.

Your Location: Home > Support > Solution >

Introduce The Product Of Fiber-CAN converter_GCAN

1 Introduction

1.1 Overview

The GCAN-208 converter has integrated two standard CAN-Bus interface, one fiber interface(Single mode, multi mode, SC, ST). GCAN-208 converter can build a connection between Fiber Bus and CAN-Bus. With this converter in pairs, users can easily extend the distance of CAN-Bus and eliminate the interference effectively. It can also prevent the bus from electromagnetic interference, ground loop interference and lightning strike.

1.2 Properties at a glance

    Power supply: 9~30V(50mA, 24V DC)
    Surge immunity level: ±1KV
    Working temperature range from -40 to 85°C
    Operating humidity range: 5% to 95% RH no condensation
    Integrated 2 CAN-Bus interface with terminal
    CAN-Bus signals include: CAN_H, CAN_L, CAN_GND
    CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards
    CAN-Bus baud rates range from 5Kbps to 1Mbps, configured by DIP switch
    CAN-Bus isolation converter insulation voltage: DC 1500V
    Fiber interface: SC, ST optional
    Fiber transmission mode: single mode, multi mode optional
    Size: (L)121mm * (W)93mm * (H)22mm

    2 Interface specification

    GCAN-208 converter interface specification are shown in figure 2.1. After power up the converter, it will be work in the working state.