Introduce The Product Of USBCAN-modul 8_GCAN
1 Introduction
1.1 Overview
USBCAN-model 8 adapter is a debug or analysis tool with eight CAN-Bus channels. Using this adapter, PC can quickly connect to CAN-Bus network through USB interface, and become a intelligent node of CAN-Bus to transmit/receive CAN-Bus data. Adapter comes with isolation. Device driver, software and programming interfaces (VC, VB, Net, Delphi, Labview, C++ Builder) exist for different Windows systems.
1.2 Properties at a glance
Adapter for USB connection (USB 2.0, compatible with USB 1.1 and USB 3.0);
Integrated 8-way CAN-Bus interface, the use of DB9 wiring;
Support CAN2.0A and CAN2.0B frame format, accord ISO/DIS 11898 specification;
CAN-Bus communication baud rate between 5Kbps~1Mbps arbitrary programmable;
Use DC + 24V power supply;
Galvanic isolation on the CAN connection up to 1500 V;
Bit rates up to 1 Mbit/s Time stamp resolution 1μs;
Max received data traffic: 14000 fps;
Device driver and software support Windows XP/7/8/10;
Support ECANTools software;
Extended operating temperature range from -40 to 85 °C;
Dimensions： (L)200mm * (W)135mm * (H)24mm.
1.3 Typical application
Test CAN-Bus network or device;
Automotive electronics development;
Electrical system communication test.
Industrial control network.
Listen all CAN-Bus communication.
2 Installation
This chapter describes how to connect the USB-CAN adapter with a computer and the precautions when connecting the USB-CAN adapter with a computer for the first time.
2.1 Driver and software installation
Note: Before install the driver or software, please ensure that the user login an administrator account of Windows, or the user account has permissions to install the driver and software, otherwise it may lead to the installation failed.
2.1.1 Install driver and software
ECANTools has been integrated with hardware driver installation program, users can directly install ECANTools. If you only need to install the driver, please enter the "driver" folder, select the installation file that corresponds to the system type. ("DriverSetup.exe" for 32-bit. "DriverSetup64.exe" for 64-bit)
2.1.2 Uninstall driver and software
Users can run the DriverSetup.exe/DriverSetup64.exe and click "Uninstall" button to uninstall the installed device driver.
2.2 Connect to PC
USBCAN-modul 8 using DC +24V DC power supply, DC +24V and with USB access.
2.3 Connect to CAN-Bus
USBCAN-modul 8 interface card integrated 8-channel CAN channels, 8 DB9 (CiA) interface, the terminal pin is defined as shown in Table 2.1.
Normally communication requires CAN_H with bus CAN_H, CAN_L with bus CAN_L.
1.1 Overview
USBCAN-model 8 adapter is a debug or analysis tool with eight CAN-Bus channels. Using this adapter, PC can quickly connect to CAN-Bus network through USB interface, and become a intelligent node of CAN-Bus to transmit/receive CAN-Bus data. Adapter comes with isolation. Device driver, software and programming interfaces (VC, VB, Net, Delphi, Labview, C++ Builder) exist for different Windows systems.
1.2 Properties at a glance
Adapter for USB connection (USB 2.0, compatible with USB 1.1 and USB 3.0);
Integrated 8-way CAN-Bus interface, the use of DB9 wiring;
Support CAN2.0A and CAN2.0B frame format, accord ISO/DIS 11898 specification;
CAN-Bus communication baud rate between 5Kbps~1Mbps arbitrary programmable;
Use DC + 24V power supply;
Galvanic isolation on the CAN connection up to 1500 V;
Bit rates up to 1 Mbit/s Time stamp resolution 1μs;
Max received data traffic: 14000 fps;
Device driver and software support Windows XP/7/8/10;
Support ECANTools software;
Extended operating temperature range from -40 to 85 °C;
Dimensions： (L)200mm * (W)135mm * (H)24mm.
1.3 Typical application
Test CAN-Bus network or device;
Automotive electronics development;
Electrical system communication test.
Industrial control network.
Listen all CAN-Bus communication.
2 Installation
This chapter describes how to connect the USB-CAN adapter with a computer and the precautions when connecting the USB-CAN adapter with a computer for the first time.
2.1 Driver and software installation
Note: Before install the driver or software, please ensure that the user login an administrator account of Windows, or the user account has permissions to install the driver and software, otherwise it may lead to the installation failed.
2.1.1 Install driver and software
ECANTools has been integrated with hardware driver installation program, users can directly install ECANTools. If you only need to install the driver, please enter the "driver" folder, select the installation file that corresponds to the system type. ("DriverSetup.exe" for 32-bit. "DriverSetup64.exe" for 64-bit)
2.1.2 Uninstall driver and software
Users can run the DriverSetup.exe/DriverSetup64.exe and click "Uninstall" button to uninstall the installed device driver.
2.2 Connect to PC
USBCAN-modul 8 using DC +24V DC power supply, DC +24V and with USB access.
2.3 Connect to CAN-Bus
USBCAN-modul 8 interface card integrated 8-channel CAN channels, 8 DB9 (CiA) interface, the terminal pin is defined as shown in Table 2.1.
Normally communication requires CAN_H with bus CAN_H, CAN_L with bus CAN_L.
