Solving the problem of linkage control of fire trucks on hig
The customer is a fire truck refitting factory for climbing platform, and a set of independent controller is required to realize linkage logic for mounting water pump, foam proportion mixing and ladder luffing. Adopting Guangcheng GCAN-PLC-521C combined EtherCAT main station PLC, supporting IEC61131-3 programming, with dual CAN ports and Modbus interfaces, and an expandable IO module on the backplane.
The PLC reads the chassis J1939 signal through the CAN bus, combines it with the data from the upper pressure and angle sensors, runs the pre written linkage control program, outputs commands for water pump start stop, valve switching, and amplitude change, and carries the upper control logic.
Guangcheng Technology GCAN-PLC-521C Product Official Website Link
https://www.gcgd.net/productinfo/343925.html
If you need Guangcheng Technology GCAN-PLC-521C to solve the linkage control problem of fire trucks on the high-altitude platform, you can add WeChat 13019325660 for professional technical service.
The PLC reads the chassis J1939 signal through the CAN bus, combines it with the data from the upper pressure and angle sensors, runs the pre written linkage control program, outputs commands for water pump start stop, valve switching, and amplitude change, and carries the upper control logic.
Guangcheng Technology GCAN-PLC-521C Product Official Website Link
https://www.gcgd.net/productinfo/343925.html
If you need Guangcheng Technology GCAN-PLC-521C to solve the linkage control problem of fire trucks on the high-altitude platform, you can add WeChat 13019325660 for professional technical service.
