Industrial single-wire CAN converter Device Installation

2. Device installation

 

2.1 Exterior
 

 

2.2 Interface

High-speed CAN terminal DB9 interface definition (female)

 

Single-wire CAN terminal DB9 interface definition (male)
 

2.2.1 Power supply
 

GCAN-404 does not need to add the power supply.
 

2.2.2 High-speed CAN termination resistor
 

GCAN-404 does not add termination resistor. If you need, please add it by yourself.
 

2.2.3 Single wire CAN connected to GND
 

Single-wire CAN terminal GND pin must be grounded.
 

2.2.4 Single wire CAN termination resistor
 

Single-wire CAN does not need to connect termination resistor.
 

3. Instructions for use

 

3.1 Running mode
 

The GCAN-404 supports normal mode (33.33Kbit/s) and high speed mode (83.33Kbit/s). Both modes can be switched automatically.
 

3.2 CAN-Bus baud rate
 

When the user uses GCAN-404, it is necessary to ensure that the baud rate of the High-speed CAN is consistent with that of the single-wire CAN. The most common single-wire CAN baud rate: 33.33Kbit/s, 83.33Kbit/s.