Introduction of CAN-Bus data recorder_GCAN

1. Introduction

1.1 Functional Overview

GCAN-401 CAN-Bus data recorder is specially used for offline record CAN-Bus data.

GCAN-401 has integrated one CAN-bus interface . Users can use TF card record bus data real-time.

GCAN-401 adapter is suitable for historical data playback, error message analysis.

1.2 Properties at a Glance

High speed 32-bit industrial-grade processor

Use an external power supply (DC +9~30V，100mA)

EMC ：contact ±2KV，air ±15KV

EFT：±1KV

SURGE：±1KV

CAN-Bus connection via OPEH3, PHOENIX;

Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID)

CAN-Bus baud rate 10Kbps~1Mbps, set by code switch

Galvanic isolation on the CAN connection up to 1500 V

The highest receiving data traffic：14000 fps/s

CAN data time stamp resolution 100μs

Extended operating temperature range from -40 to 85 °C

Dimensions: (L) 102 mm * (W) 63mm * (H)23mm

2. Installation

2.1 Power supply

GCAN-401 support 9~30V wide range of power supply, so it can be applied to most of the industrial field and the car interior, it is power supply terminals defined as shown in table 2.1.

2.2 Connect to CAN-Bus

GCAN-401 has one CAN-Bus by a plug type terminal leads, this CAN-Bus channels can connect to CAN-Bus network or devices. Terminal pin definition as table 2.2.

 

Note: In practical use, most of the time just connected the CAN_H to CAN_H and CAN_L connected to CAN_L then communication can be realized.