+86-18309815706

中文 | English

Shenyang FuShiDe Technology Co.,Ltd.

Support

Focus on CAN Bus for 10 years,CAN bus industry leading unit.

Your Location: Home > Support > Solution >

Introduce The Product Of USBCAN-I Pro_GCAN

1.  Introduction

1.1 Functional Overview

USBCAN-I Pro adapter is a debug or analysis tool with two CAN-Bus channel. Withthis adapter, PC can quickly connect to CAN-Bus network through USB interface, andbecome a intelligent node of CAN-Bus to transmit/receive CAN-Bus data.

Adapter comes with isolation, and can be used in different Windows systems. Devicedriver, software and programming interfaces(VC, VB, Net, Delphi, Labview,C++Builder) exist for different operating systems, so programs can easily access a
connected CAN bus.


USBCAN-IPro

1.2 Properties at a Glance

Adapter for USB connection (USB 1.1, compatible with USB 2.0)
USB voltage supply
Bit rates up to 1 Mbit/s Time stamp resolution 1μs
Compliant with CAN specifications 2.0A (11-Bit ID) and 2.0B (29-Bit ID)
CAN-Bus connection via OPEH4, PHOENIX
NXP SJA1000 CAN controller
NXP PCA82C251 CAN transceiver
Support ECAN Tools software
Galvanic isolation on the CAN connection up to 1500 V
Extended operating temperature range from -40 to 85 °C
Device driver and software support Windows 2000/2003/XP/7/8/10

Size: (L)95mm * (W)57mm * (H)24mm

1.3 Typical application

Test CAN-Bus network or device;
Automotive electronics development;
Electrical system communication test.
industrial control network.
Listen all CAN-Bus communication.


2. Installation

This chapter describes how to connect the USB-CAN adapter to the computer and theprecautions when connecting the USB-CAN adapter to the computer for the first time.

2.1 Driver and software installation

Note: Before install the driver or software, please ensure that the user login windowsaccount is administrator, or the user account has to install the driver and softwarerelated permissions, otherwise it may lead to the installation failed.

2.1.1 Install driver and software

ECAN Tools has been integrated hardware driver installation program, users candirectly install ECAN Tools.If you only need to install the driver, please enter the “driver” folder, select the
installation file that corresponds to the system type. (“DriverSetup.exe” for 32-bit.“DriverSetup64.exe” for 64-bit)


2.1.2 Uninstall driver and software


Users can run the DriverSetup.exe/ DriverSetup64.exe and click "Uninstall" button touninstall the installed device driver.

2.2 Connect to PC

The adapter can be connected directly to a PC using a USB cable, if the USB powersupply is insufficient, you need to use external power supply.

2.2.1 USB power supply mode
USB power supply mode is suitable for the most applications, such as: whenUSBCAN-I Pro is the only device in USB port.

2.2.2 External power supply mode (only the USBCAN - II Pro support)


External power supply mode is suitable for the USB port using an USB HUB andhave already connect multiple USB device, this will lead to the adapter lack of electricity supply.

2.3 Connect to CAN-Bus

USBCAN-I Pro has one CAN-Bus by a 4 Pin plug type terminal leads, this CAN-Bus channels can connect to CAN-Bus network or devices. Terminal pin definition as Table 2.1 below.


 
Note: In practical use, most of the time just connected the CAN_H to CAN_Hand CAN_L connected to CAN_L then communication can be realized