（74）：GCAN-PLC-511
Many multi segment CANopen projects often encounter these pain points: two independent CAN buses are required to connect the servo cluster and sensor network separately, and ordinary single CAN port PLCs require additional configuration of CAN gateways, which increases hardware costs and fault points; Frequent increase and decrease of IO points in the later stage results in high cost of replacing the main controller; The complexity of program logic requires storage of computing power; Imported motion controllers have high prices, long lead times, and unstable communication in harsh industrial environments.
Shenyang Guangcheng GCAN-PLC-511 is equipped with a 400M high-performance processor, with no IO on the main body. It can expand up to 32 GC series plug-in IO modules, with automatic address allocation for module insertion and no manual configuration required; Integrated with 2 independent CAN, Ethernet, RS232/485 multiplexing interfaces, supporting CANopen, Modbus RTU/TCP master-slave stations; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500Vrms electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation, adaptable to various IO modules including digital, analog, thermistor, and thermocouple.
Real implementation case: Multi station assembly tooling project, one CAN is connected to servo drive, the other CAN is connected to bus sensor, the network port is connected to touch screen and upper system, and the plug-in IO is added or removed as needed, eliminating the need for gateway, simplifying cabinet wiring, and shortening the debugging cycle.
Suitable for multi CAN network segment tooling, complete automation equipment, and complex motion control scenarios, welcome to add WeChat 13019325660 to obtain routines and technical information.
Shenyang Guangcheng GCAN-PLC-511 is equipped with a 400M high-performance processor, with no IO on the main body. It can expand up to 32 GC series plug-in IO modules, with automatic address allocation for module insertion and no manual configuration required; Integrated with 2 independent CAN, Ethernet, RS232/485 multiplexing interfaces, supporting CANopen, Modbus RTU/TCP master-slave stations; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500Vrms electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation, adaptable to various IO modules including digital, analog, thermistor, and thermocouple.
Real implementation case: Multi station assembly tooling project, one CAN is connected to servo drive, the other CAN is connected to bus sensor, the network port is connected to touch screen and upper system, and the plug-in IO is added or removed as needed, eliminating the need for gateway, simplifying cabinet wiring, and shortening the debugging cycle.
Suitable for multi CAN network segment tooling, complete automation equipment, and complex motion control scenarios, welcome to add WeChat 13019325660 to obtain routines and technical information.
Last：（73）：GCAN-PLC-510
Next：（75）：GCAN-PLC-521C
