（71）：GCAN-PLC-425
Many small and medium-sized multi axis motion projects often encounter these pain points: they require EtherCAT high-speed servo motion control, as well as the need to interface with CANopen devices and Modbus instruments; Ordinary PLCs lack a native EtherCAT master station and require additional installation of gateways, which increases hardware costs and fault points; The number of IO points is not fixed, making it difficult to add or remove points in the later stage of renovation; Imported motion controllers have high prices and long lead times, and poor bus communication stability under harsh working conditions.
Shenyang Guangcheng GCAN-PLC-425, equipped with EtherCAT master station, supports up to 10 EtherCAT slave stations; Integrated Ethernet, CAN, RS485 interfaces, supporting CANopen, Modbus RTU/TCP master-slave stations; The main body does not have built-in IO, and can expand up to 32 GC series plug-in IO modules. The modules are automatically assigned addresses and do not require manual configuration; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation.
Real implementation case: Small multi axis assembly tooling transformation, EtherCAT bus driving multiple servos, CAN docking sensors, 485 access to detection instruments, adding or removing plug-in IO modules as needed, eliminating additional gateways, simplifying cabinet wiring, and shortening project debugging cycles.
Suitable for scenarios such as multi axis motion equipment, assembly fixtures, and automated production lines. If you have EtherCAT bus control requirements, please feel free to contact us on WeChat 13019325660 for routine and technical information.
Shenyang Guangcheng GCAN-PLC-425, equipped with EtherCAT master station, supports up to 10 EtherCAT slave stations; Integrated Ethernet, CAN, RS485 interfaces, supporting CANopen, Modbus RTU/TCP master-slave stations; The main body does not have built-in IO, and can expand up to 32 GC series plug-in IO modules. The modules are automatically assigned addresses and do not require manual configuration; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation.
Real implementation case: Small multi axis assembly tooling transformation, EtherCAT bus driving multiple servos, CAN docking sensors, 485 access to detection instruments, adding or removing plug-in IO modules as needed, eliminating additional gateways, simplifying cabinet wiring, and shortening project debugging cycles.
Suitable for scenarios such as multi axis motion equipment, assembly fixtures, and automated production lines. If you have EtherCAT bus control requirements, please feel free to contact us on WeChat 13019325660 for routine and technical information.
Last：（70）：GCAN-PLC-325
Next：No more
