（69）：GCAN-PLC-322
Many automation projects with multiple parallel CAN buses often encounter these pain points: two independent CANopen buses need to be connected to different servo clusters, and a regular single CAN port PLC requires an additional CAN gateway, which increases hardware costs and increases the number of fault points; At the same time, it is necessary to take into account touch screen, upper monitoring, and multi-channel Modbus instruments; IO points can change as needed, and imported controllers have high prices and long lead times; Bus communication is prone to errors under workshop electromagnetic interference and wide temperature conditions.
Shenyang Guangcheng GCAN-PLC-322, equipped with dual Ethernet switch ports, does not require an external switch; The main body has 8 channels of DI and 6 channels of DO, with 5 channels of high-speed counting and 5 channels of high-speed pulse output multiplexed; Equipped with 2 CAN buses RS232、RS485， Supports CANopen, Modbus RTU/TCP master-slave stations; Up to 16 GC series IO modules can be expanded, and the modules can be automatically addressed without manual configuration; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation, optional PNP/NPN version.
Real implementation case: Multi station testing fixture transformation, one set of CAN docking motion servo, another CAN connection bus sensor, network port contacts touch screen and upper system respectively, plug-in IO flexible expansion. Eliminate gateway devices, simplify cabinet wiring, and shorten debugging cycles.
Suitable for multiple CAN bus devices, testing fixtures, and small to medium-sized motion control scenarios. If you have dual CAN bus control requirements, please feel free to add WeChat 13019325660 for inquiries and technical information.
Shenyang Guangcheng GCAN-PLC-322, equipped with dual Ethernet switch ports, does not require an external switch; The main body has 8 channels of DI and 6 channels of DO, with 5 channels of high-speed counting and 5 channels of high-speed pulse output multiplexed; Equipped with 2 CAN buses RS232、RS485， Supports CANopen, Modbus RTU/TCP master-slave stations; Up to 16 GC series IO modules can be expanded, and the modules can be automatically addressed without manual configuration; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation, optional PNP/NPN version.
Real implementation case: Multi station testing fixture transformation, one set of CAN docking motion servo, another CAN connection bus sensor, network port contacts touch screen and upper system respectively, plug-in IO flexible expansion. Eliminate gateway devices, simplify cabinet wiring, and shorten debugging cycles.
Suitable for multiple CAN bus devices, testing fixtures, and small to medium-sized motion control scenarios. If you have dual CAN bus control requirements, please feel free to add WeChat 13019325660 for inquiries and technical information.
Last：（68）：GCAN-PLC-321
Next：（70）：GCAN-PLC-325
