（68）：GCAN-PLC-321
Many small and medium-sized motion control projects often encounter these pain points: they require CANopen servo drivers, touch screens, and upper level monitoring. Ordinary PLCs need to be equipped with additional switches and CAN gateways, which increases hardware costs and fault points; The demand for IO points is constantly changing, and the cost of replacing the main controller is high; Imported controllers are expensive and have long lead times; Bus communication is prone to errors in high and low temperature environments and electromagnetic interference in the workshop.
Shenyang Guangcheng GCAN-PLC-321, equipped with dual Ethernet switch ports, does not require an external switch; The main body has 8 channels of DI and 6 channels of DO, with 5 channels of high-speed counting and 5 channels of high-speed pulse output multiplexed; Equipped with 1 CAN, RS232, RS485, supporting CANopen, Modbus RTU/TCP master-slave stations; Up to 16 GC series IO modules can be expanded, and the modules can be automatically addressed without manual configuration; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation, optional PNP/NPN version.
Real implementation case: Small assembly tooling modification, sensor signal acquisition, pulse control mechanism, CAN bus docking with multiple CANopen servos, network ports contacting touch screen and upper system respectively. Eliminate the need for gateways and switches, expand the plug-in IO as needed, simplify cabinet wiring, and shorten debugging cycles.
Suitable for scenarios such as formula assembly equipment, testing fixtures, and small and medium-sized motion control, with single CAN port and multi bus control requirements. Please feel free to add WeChat 13019325660 for inquiries and routine and technical information.
Shenyang Guangcheng GCAN-PLC-321, equipped with dual Ethernet switch ports, does not require an external switch; The main body has 8 channels of DI and 6 channels of DO, with 5 channels of high-speed counting and 5 channels of high-speed pulse output multiplexed; Equipped with 1 CAN, RS232, RS485, supporting CANopen, Modbus RTU/TCP master-slave stations; Up to 16 GC series IO modules can be expanded, and the modules can be automatically addressed without manual configuration; Compatible with Codesys and OpenPCS, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail self-locking installation, optional PNP/NPN version.
Real implementation case: Small assembly tooling modification, sensor signal acquisition, pulse control mechanism, CAN bus docking with multiple CANopen servos, network ports contacting touch screen and upper system respectively. Eliminate the need for gateways and switches, expand the plug-in IO as needed, simplify cabinet wiring, and shorten debugging cycles.
Suitable for scenarios such as formula assembly equipment, testing fixtures, and small and medium-sized motion control, with single CAN port and multi bus control requirements. Please feel free to add WeChat 13019325660 for inquiries and routine and technical information.
Last：（67）：GCAN-PLC-320
Next：No more
