（34）：GCAN-4055
Industrial production lines and building automation renovation often encounter IO pain points: on-site emergency stop, limit, scattered fan points, traditional point-to-point wiring and cable stacking, long construction period; Strong electromagnetic interference from workshop frequency converters, frequent false alarms of switch signals; Mixing dry/wet contact sensors, ordinary IO cannot be compatible; The high and low temperature workshop modules frequently crash, and expansion requires rewiring.
Shenyang Guangcheng GCAN-4055 perfectly solves the above problems, equipped with 8 DI and 8 DO channels, compatible with dry/wet contact input, CAN interface 1500V isolation (1500VDC), wide temperature operation from -40 ℃ to+85 ℃, standard CANopen protocol, compact and easy to install DIN rail, and one key dialing to set nodes and baud rates.
Sharing a case of building automation implementation: HVAC renovation of a 12 story office building, with one GCAN-4055 installed in each control cabinet on each floor, collecting pressure difference and fan switch signals nearby, and remotely controlling ventilation units. A single CAN bus connects all modules in series, reducing wiring by 65%. There is no signal jump under electromagnetic interference. In the later stage, modules can be directly connected to new floors without the need for rewiring, greatly improving operation and maintenance efficiency.
The module is suitable for automation production lines, energy storage, coal mines, buildings, and other scenarios. If there is a need for distributed switch quantity acquisition and control, please call 13019325660.
Shenyang Guangcheng GCAN-4055 perfectly solves the above problems, equipped with 8 DI and 8 DO channels, compatible with dry/wet contact input, CAN interface 1500V isolation (1500VDC), wide temperature operation from -40 ℃ to+85 ℃, standard CANopen protocol, compact and easy to install DIN rail, and one key dialing to set nodes and baud rates.
Sharing a case of building automation implementation: HVAC renovation of a 12 story office building, with one GCAN-4055 installed in each control cabinet on each floor, collecting pressure difference and fan switch signals nearby, and remotely controlling ventilation units. A single CAN bus connects all modules in series, reducing wiring by 65%. There is no signal jump under electromagnetic interference. In the later stage, modules can be directly connected to new floors without the need for rewiring, greatly improving operation and maintenance efficiency.
The module is suitable for automation production lines, energy storage, coal mines, buildings, and other scenarios. If there is a need for distributed switch quantity acquisition and control, please call 13019325660.
Last：（33）：GCAN-4048
Next：（35）：GCAN-4056
