（64）：GCAN-PLC-326
Many multi station automation projects often encounter these pain points: a large number of switch quantity collection and output are required on site, while also considering analog closed-loop control; It is also necessary to interface with CANopen servos, multi-channel Modbus instruments, and touch screens. Ordinary PLCs have insufficient IO points and require a large number of expansion modules to be stacked. The wiring of the control cabinet is cumbersome and the cost increases; Imported controllers have high prices and long lead times; In the high and low temperature, electromagnetic interference environment of industrial sites, IO and bus communication are prone to instability.
Shenyang Guangcheng GCAN-PLC-326 (E/R) programmable controller, with 24 DI and 16 DO channels, multiplexed with 3 high-speed counting channels and 2 PWM outputs; 2 channels of 16 bit AI and 2 channels of AO analog signals; Integrated CAN, dual RS485, Ethernet, supporting CANopen, Modbus RTU/TCP master-slave stations; Compatible with OpenPCS and Codesys, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail installation, providing two output versions: transistor and relay.
Real and replicable case: Multi station detection fixture renovation, collecting a large number of sensor signals, controlling multiple sets of cylinder actuators, simulating pressure closed-loop, CAN docking with servo, 485 docking with multiple detection instruments. Using GCAN-PLC-326 eliminates the need for additional IO expansion, allowing a single unit to complete logic, analog, and multi bus interactions, streamlining hardware and shortening debugging cycles.
Suitable for electrical equipment, testing equipment, small and medium-sized multi station equipment and other scenarios, with the need for integrated control of large points. Welcome to add WeChat 13019325660 for inquiries and technical information.
Shenyang Guangcheng GCAN-PLC-326 (E/R) programmable controller, with 24 DI and 16 DO channels, multiplexed with 3 high-speed counting channels and 2 PWM outputs; 2 channels of 16 bit AI and 2 channels of AO analog signals; Integrated CAN, dual RS485, Ethernet, supporting CANopen, Modbus RTU/TCP master-slave stations; Compatible with OpenPCS and Codesys, following five programming languages of IEC-61131-3; 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail installation, providing two output versions: transistor and relay.
Real and replicable case: Multi station detection fixture renovation, collecting a large number of sensor signals, controlling multiple sets of cylinder actuators, simulating pressure closed-loop, CAN docking with servo, 485 docking with multiple detection instruments. Using GCAN-PLC-326 eliminates the need for additional IO expansion, allowing a single unit to complete logic, analog, and multi bus interactions, streamlining hardware and shortening debugging cycles.
Suitable for electrical equipment, testing equipment, small and medium-sized multi station equipment and other scenarios, with the need for integrated control of large points. Welcome to add WeChat 13019325660 for inquiries and technical information.
Last：（63）：GCAN-PLC-324
Next：（65）：GCAN-PLC-301
