（57）：GCAN-GT-8221
Many automation upgrade projects often encounter these pain points: the EtherCAT high-speed main control system needs to be connected to existing CAN and CANopen devices. The original CAN devices have good performance, and replacing them all is costly and time-consuming; Ordinary conversion devices do not support chain cascading, and additional switches are required for networking; Industrial sites have strong electromagnetic interference, which can easily lead to packet loss and synchronization delay, affecting real-time control of equipment.
Shenyang Guangcheng GCAN-GT-8221 is an EtherCAT slave intelligent gateway with dual RJ45 EtherCAT interfaces that support device cascading without the need for an external switch; It can achieve bidirectional conversion between EtherCAT and CAN2.0A/B, CANopen, and can be quickly configured by importing EDS files; Equipped with 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail installation compatible with control cabinet.
Real and replicable case: lithium battery assembly line transformation, TwinCAT as EtherCAT master station, connected to the original CANopen servo drive. Using GCAN-GT-8221 to achieve protocol interoperability, all existing servos are retained for reuse, enabling high-speed real-time motion control, reducing hardware procurement, and shortening project debugging cycles.
Suitable for lithium battery equipment, energy storage, multi axis automation production lines and other scenarios, with EtherCAT docking CAN bus requirements. Welcome to add WeChat 13019325660 for configuration information and networking solutions.
Shenyang Guangcheng GCAN-GT-8221 is an EtherCAT slave intelligent gateway with dual RJ45 EtherCAT interfaces that support device cascading without the need for an external switch; It can achieve bidirectional conversion between EtherCAT and CAN2.0A/B, CANopen, and can be quickly configured by importing EDS files; Equipped with 1500VDC electrical isolation, wide temperature range of -40 ℃~+85 ℃, DIN rail installation compatible with control cabinet.
Real and replicable case: lithium battery assembly line transformation, TwinCAT as EtherCAT master station, connected to the original CANopen servo drive. Using GCAN-GT-8221 to achieve protocol interoperability, all existing servos are retained for reuse, enabling high-speed real-time motion control, reducing hardware procurement, and shortening project debugging cycles.
Suitable for lithium battery equipment, energy storage, multi axis automation production lines and other scenarios, with EtherCAT docking CAN bus requirements. Welcome to add WeChat 13019325660 for configuration information and networking solutions.
Last：（56）：GCAN-GT-8321S
Next：（58）：GCAN-IO-210
