（43）：GCAN-IO-8100
There are common IO transformation pain points in environmental water treatment and automation production line transformation: on-site liquid level PH、 The pump valve points are scattered, traditional hard wired cables are messy, and the construction period is long; Strong electromagnetic interference from on-site water pump frequency converter, resulting in drift in analog readings; The digital quantity, thermal resistance, and 4-20mA signal are mixed, and a single IO module cannot be compatible; Newly added monitoring points in the later stage require rewiring, and manual mapping of registers during debugging is time-consuming and laborious, resulting in high overall renovation costs.
Shenyang Guangcheng GCAN-IO-8100 perfectly solves the above problems, supports Modbus TCP/RTU dual protocols, can be freely matched with DI/DO/PT100/analog modules, and can expand up to 32 sets of IO per unit; automatic power on configuration does not require computer configuration, 1000V electrical isolation anti-interference, wide temperature operation from -40 ℃ to+85 ℃, DIN rail buckle installation, network port supports firmware upgrade.
Real and replicable case: The renovation of a township sewage treatment station, where IO modules were installed nearby in each tank with GCAN-IO-8100, and a single bus was connected to the central control PLC to collect liquid level, water quality, and pump start stop signals nearby. The wiring volume was reduced by 60%, and the data in humid and high interference environments was stable. In the later stage, new monitoring points were directly installed with modules, and the debugging efficiency was improved by 80%.
Suitable for scenarios such as water treatment, photovoltaics, intelligent production lines, HVAC, etc., with distributed flexible IO expansion needs. Please call 13019325660 for specific inquiries.
Shenyang Guangcheng GCAN-IO-8100 perfectly solves the above problems, supports Modbus TCP/RTU dual protocols, can be freely matched with DI/DO/PT100/analog modules, and can expand up to 32 sets of IO per unit; automatic power on configuration does not require computer configuration, 1000V electrical isolation anti-interference, wide temperature operation from -40 ℃ to+85 ℃, DIN rail buckle installation, network port supports firmware upgrade.
Real and replicable case: The renovation of a township sewage treatment station, where IO modules were installed nearby in each tank with GCAN-IO-8100, and a single bus was connected to the central control PLC to collect liquid level, water quality, and pump start stop signals nearby. The wiring volume was reduced by 60%, and the data in humid and high interference environments was stable. In the later stage, new monitoring points were directly installed with modules, and the debugging efficiency was improved by 80%.
Suitable for scenarios such as water treatment, photovoltaics, intelligent production lines, HVAC, etc., with distributed flexible IO expansion needs. Please call 13019325660 for specific inquiries.
Last：（42）：GCAN-IO-8001
Next：（44）：GCAN-IO-8101
