（38）：GCAN-4128
Industrial small control cabinets and small production line renovations often encounter IO expansion pain points: on-site emergency stops, scattered fan limit points, and complex traditional point-to-point wiring cables; Electromagnetic interference from workshop frequency converters can easily cause signal false alarms; Ordinary IO modules have a large volume and are difficult to install in narrow cabinets; Some projects only require a small amount of DI/DO, which wastes the cost of purchasing multi-channel IO, and equipment in high and low temperature environments is prone to downtime.
Shenyang Guangcheng GCAN-4128 perfectly solves the above problems, with 4 digital inputs and 4 digital outputs, supporting CAN/CANopen dual-mode; CAN interface 1500V electrical isolation anti-interference, wide temperature stability from -40 ℃ to+85 ℃; The body is only 78 × 31.5mm, compact in size, and can be placed without rails. It is powered by 8-32V universal power and can quickly set nodes and baud rates by dialing.
Real and replicable case: Renovation of a small component assembly production line, with only 4 photoelectric inputs and 4 solenoid valve outputs per workstation. A GCAN-4128 is deployed in each workstation control cabinet, and a single CAN bus is aggregated to the main PLC. Compared to traditional hard wiring, the amount of wire used has been reduced by 60%. The small electrical control box can easily accommodate it, and there are no signal jumps in the strong interference environment of the workshop. The fault linkage response is stable, and the transformation cycle is greatly shortened.
The module is suitable for small automation, energy storage auxiliary control, building fan control and other scenarios. There are a small number of distributed data collection requirements. Please call 13019325660 for specific inquiries.
Shenyang Guangcheng GCAN-4128 perfectly solves the above problems, with 4 digital inputs and 4 digital outputs, supporting CAN/CANopen dual-mode; CAN interface 1500V electrical isolation anti-interference, wide temperature stability from -40 ℃ to+85 ℃; The body is only 78 × 31.5mm, compact in size, and can be placed without rails. It is powered by 8-32V universal power and can quickly set nodes and baud rates by dialing.
Real and replicable case: Renovation of a small component assembly production line, with only 4 photoelectric inputs and 4 solenoid valve outputs per workstation. A GCAN-4128 is deployed in each workstation control cabinet, and a single CAN bus is aggregated to the main PLC. Compared to traditional hard wiring, the amount of wire used has been reduced by 60%. The small electrical control box can easily accommodate it, and there are no signal jumps in the strong interference environment of the workshop. The fault linkage response is stable, and the transformation cycle is greatly shortened.
The module is suitable for small automation, energy storage auxiliary control, building fan control and other scenarios. There are a small number of distributed data collection requirements. Please call 13019325660 for specific inquiries.
Last：（37）：GCAN-4068
Next：（39）：GCAN-5032
