1.Overview

The GCAN-207 converter has integrated one standard CAN-Bus interface, one Serial-Bus interface (RS232 or RS485). GCAN-207 converter can build a connection between Serial-Bus and CAN-Bus. With this converter, equipment that used Serial-Bus can connect to CAN-Bus without changing the hardware structure, this makes multi-Bus interconnection very flexible, and extends the application scope of CAN-Bus.

2.Properties at a glance

Standard serial port level, RS232 model or RS485 model can switch by software

Conversion direction can be set to: CAN←→ Serial, CAN←Serial, CAN→Serial

Serial Bus baud rate range from 600bps to 115200bps

CAN-Bus supports CAN2.0A and CAN2.0B frame format, conform to ISO/DIS 11898 standards

CAN-Bus baud rates range from 5Kbps to 1Mbps

CAN-Bus interface with electrical isolation

CAN-Bus isolation converter insulation voltage: DC 1500V

Power supply: 9~30V(20mA, 24V DC)

Installation method: DIN guide rail

Working temperature range from -40 to 85 °C

Size: (L)112mm * (W)70mm * (H)25mm

3.Examples

3.1 Transparent conversion

a. Serial port→CAN

GCAN-207 will send the serial data to CAN-Bus immediately if GCAN-207 receive the serial data.

E.g. Serial data 11 22 33 44 55 66 77 88 converts to CAN-Bus. Frame ID is the configuration for“发送标识符” which users have set. Frame data is 11 22 33 44 55 66 77 88.

b.CAN→Serial port

GCAN-207 will send the CAN data to serial port immediately if GCAN-207
receive the CAN data.

E.g.：Check“允许CAN帧信息转发到串行帧中”and“允许CAN帧标识转发到串行帧中”which means the CAN frame information（帧信息） and the frame ID （帧标识）will display in the serial frame.
 
CAN frame is standard data frame. Frame ID is 00 01. Frame data is 11 22 33 44 55 66 77 88. GCAN-207 converts to Serial port. Serial data is 08 00 01 11 22 33 44 55 66 77 88.
 

3.2 Transparent conversion with identity

Transparent with identity transformation is the special usage of Transparent conversion.

a. Serial port→CAN
Users can set the start position address and the length of the CAN frame ID in the configuration.
E.g.：If the CAN frame ID starting position address is 1, the length is 2 in the Serial frame.
Serial frame data is 01 23 33 44 55 66 77 88. GCAN-201 converts to CAN. CAN frame ID is 123, and frame data is 33 44 55 66 77 88.
 
b. CAN→Serial port
E.g.：If the CAN frame ID starting position address is 1, the length is 3 in the Serial frame（Extension frames）. Conversion is shown as Figure below.

3.3 Format conversion

4.Technical Specifications

If you have technical problems, please contact us by email. We will reply to you within 24 hours after receiving the mail.

After sales technical mailbox: 2881884588@qq.com