Email: sygckj@gmail.com

中文 | English

Shenyang FuShiDe Technology Co.,Ltd.

Products

If we are not online, please leave a message, we will contact you asap.

Email:sygckj@gmail.com

Your Location: Home > Products > CAN Bus analyzer >

USB-CAN modul1/modul2

  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
  • USB-CAN modul1/modul2
Brand:
Model:
USB-CAN modul1/modul2
Application:
buy now
  • If you want to buy this model, please tell us(sygckj@gmail.com).







    The USB-CANmodul1/USB-CANmodul2(3204001, 3204003), is a small-sized and very
    cost-effective CAN-bus interface solution for connecting the CAN-bus to the PC via USB.
    CAN messages are tunneled transparently. The module supports all kind of higher-layer
    CAN-based protocols, such as CANopen, SDS, DeviceNet or J1939. Its fast yet low-power
    32-bit CPU core with integrated message buffers ensures reliable communication even at
    high busload. Each received CAN message gets a precise time stamp derived from the
    module’s hardware timer.

    The provided PC driver allows for easy plug&play installation and supports simultaneous
    operation of up to 64 USB-CANmodul devices on the same PC.

    An extremely attractive price-performance ratio and the compact design make this CAN
    USB Adapter ideal suited for CAN-bus based development, service and maintenance tasks,
    as well as use in high-volume serial products.

    The USB-CANmodul1/USB-CANmodul2 has been tested according to the
    EMC Directive 2004/108/EC.


    Available CAN channels 1
    PC connection USB V2.0 Full-speed
    CAN interface 1(2) CAN interface, high-speed CAN according 
       
    ISO 11898-2, optical isolated
    CAN transceiver high-speed CAN: 82C251high-speed CAN: 82C251
    CAN specification ISO 11898-1/2, Standard Frames, Extended Frames
    CAN connector SUB-D9
    CAN bit rate 10kbps to 1Mbps
    CAN bus features Transmit Remote Frames
    Software support for Windows® OS Listen only mode, 100µs hardware time stamp 
    for received messages, Tx message receipt with
    timestamp
    Automatically transmission of cyclical messages
    by the module, Hardware acceptance filter, 
    Callback events for receive, status change and connect/disconnect
    USB-CANmodul Control - Configuration tool 
    for managing multiple USB-CANmodul devices
    PCAN View - a simple CAN monitor that allows 
    for reception and transmission of CAN messages
    Programmers support for Windows OS Comprehensive programmers API including 
    demo source for Microsoft Visual C++, LabView,
    Visual Basic .NET
    CANopen API for .NET - based on SYS TEC
    CANopen Stack and allows for easy 
    implementation of CANopen-enabled applications
    Programmers support for Linux OS SocketCAN based API
    Device driver Windows® 8/7/Vista/XP (32/64 bit), Linux
    LED indicators LEDs for power supply, CAN state, CAN traffic
    Power supply USB powered
    Current consumption typ. 150mA
    Operating temperature -40ºC to +85ºC
    Housing table case
    Weight USB-CANmodul1:approx. 80g
    USB-CANmodul2:approx. 120g
    Dimensions USB-CANmodul1:78 x 45 x 18 (LxWxH, in mm)
    USB-CANmodul2:100 x 78 x 30 (LxWxH, in mm)




    PCAN-View
    PCAN-View for Windows is a simple CAN monitor for viewing,transmitting,
    and logging CAN messages.

    CANopen tools(Free software)
     CANopen DeviceExplorer
    The CANopen DeviceExplorer is a versatile tool for development, testing, diagnostics
    and service tasks. It provides CANopen master functionalities and allows the analysis
    and configuration of CANopen devices. Information about each CANopen device are
    read from the electronic data sheet of the device (EDS or XDD format), or they can
    be scanned directly from the device. Using standardized device configuration
    files (DCF) device configurations can be saved or imported. Additionally, data of
    entire CANopen networks can be stored in project files.
       The CANinterpreter, is already included in standard version as CAN-Analyzer tool.
    It allows monitoring of the CAN-Bus in real time and supports starting and diagnosis
    of networks. User is able to see messages transmitted to the bus as raw
    CAN-Telegrams (CAN Layer 2) or interpreted as CANopen message (CAN Layer 7).
    An optional recording of data transmission allows an offline analysis afterwards.
       CANopen DeviceExplorer shows CAN-Messages with hardware timestamps, generated
    by SYS TEC electronic USB-CANmodules. Combined with Process Data Linker plug-in
    CANopen DeviceExplorer becomes an all-embracing tool for entire functionalities
    like planning, implementing, analysis and debugging.
    ●  Saving and loading of device and network configurations
    ●  project-oriented network configurations based on CANopen EDS and DCF files
    ●  online and offline access to object dictionary of CANopen devices
    ●  integrated CANopen master functionalities like: NMT commands (Start/Stop network),
    node guarding (Start/Stop Guarding & Heartbeat), configuration of PDOs
    (Mapping & Communication Parameter), reset of CANopen devices (Reset Communication, Reset Node)
    ●  integrated CAN-Analyzer for real time bus monitoring like display of CAN telegrams (CAN Layer 2),
    Interpretation of CANopen messages (CAN Layer 7)
    ●  recording of CAN-Telegrams and interpretation afterwards
    ●  displaying and manually transmission of PDOs
    ●  interpretation of CAN-Data according to user specifications
    ●  download of device and network configuration via CAN-bus
    ●  network scan for detection of devices connected to the bus
    ●  transmission of CAN messages or sequences in single or periodic

      CANopen Configuration Suite
    The CANopen Configuration Suite presents a high-performance and easy-to-use tool for efficient
    and straightforward planning of complete CANopen networks as well as devices. It combines
    functionality with an intuitive operation and supports you in all project phases, including
    planning, development, startup and service. You can concentrate immediately on your application
    and the definition of the systems parameters. The CANopen Configuration Suite includes the
    CANopen DeviceExplorer, the PDL (Process Data Linker) plug-in and comes with the SYS TEC
    electronic CAN driver for exclusive access to various CAN interfaces.

     

    ●  Saving and loading of device and network configurations
    ●  project-oriented network configurations based on CANopen EDS and DCF files
    ●  online and offline access to object dictionary of CANopen devices
    ●  integrated CANopen master functionalities like: NMT commands (Start/Stop network),
    node guarding (Start/Stop Guarding & Heartbeat), configuration of PDOs (Mapping & Communication
    Parameter), reset of CANopen devices (Reset Communication, Reset Node)
    ●  integrated CAN-Analyzer for real time bus monitoring like display of CAN telegrams (CAN Layer 2),
    Interpretation of CANopen messages (CAN Layer 7)
    ●  recording of CAN-Telegrams and interpretation afterwards
    ●  displaying and manually transmission of PDOs
    ●  interpretation of CAN-Data according to user specifications
    ●  download of device and network configuration via CAN-bus
    ●  network scan for detection of devices connected to the bus
    ●  transmission of CAN messages or sequences in single or periodic
    ●  automatic PDO mapping by drag & drop function
    ●  generating DCF files with provided PDO configuration
    ●  edit of node configuration
    ●  adjustments for NMT Startup
    ●  adjustments for Slave Assignment
    ●  SYNC adjustments
    ●  export of network variable list according to IEC 61131-3
  • The USB-CANmodul1, is a small-sized and very cost-effective CAN-bus interface solution for connecting the CAN-bus to the PC via USB. CAN messages are tunneled transparently. The module supports all kind of higher-layer CAN-based protocols, such as CANopen, SDS, DeviceNet or J1939. Its fast yet low-power 32-bit CPU core with integrated message buffers ensures reliable communication even at high busload. Each received CAN message gets a precise time stamp derived from the module’s hardware timer.

    The provided PC driver allows for easy plug&play installation and supports simultaneous operation of up to 64 USB-CANmodul devices on the same PC.

    An extremely attractive price-performance ratio and the compact design make this CAN USB Adapter ideal suited for CAN-bus based development, service and maintenance tasks, as well as use in high-volume serial products.

    The USB-CANmodul1 has been tested according to the EMC Directive 2004/108/EC.

  •  

    Performance characteristics                                                              

    Available CAN channels 1
    PC connection USB V2.0 Full-speed
    CAN interface 1(2) CAN interface, high-speed CAN according 
       
    ISO 11898-2, optical isolated
    CAN transceiver high-speed CAN: 82C251high-speed CAN: 82C251
    CAN specification ISO 11898-1/2, Standard Frames, Extended Frames
    CAN connector SUB-D9
    CAN bit rate 10kbps to 1Mbps
    CAN bus features Transmit Remote Frames
    Software support for Windows® OS Listen only mode, 100µs hardware time stamp 
    for received messages, Tx message receipt with
    timestamp
    Automatically transmission of cyclical messages
    by the module, Hardware acceptance filter, 
    Callback events for receive, status change and connect/disconnect
    USB-CANmodul Control - Configuration tool 
    for managing multiple USB-CANmodul devices
    PCAN View - a simple CAN monitor that allows 
    for reception and transmission of CAN messages
    Programmers support for Windows OS Comprehensive programmers API including 
    demo source for Microsoft Visual C++, LabView,
    Visual Basic .NET
    CANopen API for .NET - based on SYS TEC
    CANopen Stack and allows for easy 
    implementation of CANopen-enabled applications
    Programmers support for Linux OS SocketCAN based API
    Device driver Windows® 8/7/Vista/XP (32/64 bit), Linux
    LED indicators LEDs for power supply, CAN state, CAN traffic
    Power supply USB powered
    Current consumption typ. 150mA
    Operating temperature -40ºC to +85ºC
    Housing table case
    Weight USB-CANmodul1:approx. 80g
    USB-CANmodul2:approx. 120g
    Dimensions USB-CANmodul1:78 x 45 x 18 (LxWxH, in mm)
    USB-CANmodul2:100 x 78 x 30 (LxWxH, in mm)

  •                                                                                             
    Packing
    1. Standard package. Carton
    2. Customized design

    Delivery Time
    2~5 days after receipt of your payment.
    After-sales
    24-hour telephone after-sales service
    Technical support
    GCAN provide one year free after-sales warranty, lifetime free software and technical support.
  • SYS TEC USB-CAN modul1/modul2
    User Manual(Click to view)

     

    Please ask for more information to the Engineer.

    E-mail:2881884588@qq.com